WiFi smart power 50w-60w dimming power without stroboscopic high PF mobile app remote control

1、 Product parameters
model
DG-R2665- (Z/W/B/2.4G)-（1)-
 
 
output
power
36W
38W
40W
42W
44W
46W
48W
50W
 
output voltage
24-42V
24-42V
24-42V
24-42V
24-42V
24-42V
24-42V
24-42V
 
Current accuracy
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
 
Output current
850mA
900mA
950mA
1000mA
1050mA
1100mA
1150mA
1200mA
 
Ripple voltage
＜1V
＜1V
＜1V
＜1V
＜1V
＜1V
＜1V
＜1V
 
temperature drift
±8%
 
Start time
100Vac＜1S 230Vac＜0.5S 277Vac＜0.5S
 
Output linear adjustment rate
±5%
input
Input linear adjustment rate
±5%
 
Voltage range
100 ~ 277VAC (limit voltage: 90 ~ 305vac)
 
frequency range
47～63Hz
 
power factor
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
 
efficiency
≥84%
≥84%
≥84%
≥85%
≥85%
≥85%
≥86%
≥86%
 
Surge current
<60A/ 350uS@230Vac
 
Input current
Max :0.85A
 
Harmonics (typical)
25%
 
protect
Open circuit protection
Open circuit voltage < 56vdc
 
Short circuit protection
Burping mode, which can be automatically restored after the abnormal condition is removed
 
 
environment
working temperature
-30～+50℃
 
Working humidity
20-90% RH (no condensation)
 
Storage temperature / humidity
-40 ℃ - 80 ℃ (class I environment for 6 months); 10-90% RH (no condensation)
 
Atmospheric pressure
86-106KPa
Safety regulation and electromagnetic compatibility
Safety specification
EN61347-2-13:2006 /EN61347-1:2008
 
Withstand voltage
I/P-O/P:3.75KVac,<5mA,60S；
 
Insulation impedance
I/P-O/P:500Vac,>100M?0?9
 
electromagnetic interference
According to en55015 and en61000-3-2.
 
Surge level
Comply with iec61000-4-5 (L-N: 1KV)
 
Electromagnetic immunity
According to en61000-4-2,3,4,5,6,8,11; EN61547
other
size
(L*W*H) =124mm*79mm*30mm
 
IP level
IP20
 
weight
g
 
packing
carton
 
Warranty Statement
3 years (TC & le; 75 ℃)
Test instructions
1. Unless otherwise specified, the above power factor, harmonic and efficiency parameters are measured under the conditions of ambient temperature 25 ℃, humidity 50%, input voltage 230VAC and 90% load.
Supplementary notes
1. Customers are advised to install overvoltage and undervoltage protection and surge protection devices in the lamp power supply circuit to ensure power safety
2. PC cover, shell, plug and other accessories for power supply in Luminaire must meet ul94-v0 and above fire rating
3. As a part of the whole lamp, the power supply is used in combination with the terminal equipment. Because the EMC performance is affected by the LED lamp and wiring, the terminal equipment manufacturer needs to re confirm the EMC of the whole device.
 
model
DG-R2665-(Z/W/B/2.4G)-（1)-
 
 
 
output
power
52W
55W
57W
58W
59W
63W
output voltage
24-42V
24-42V
24-42V
24-42V
24-42V
24-42V
Current accuracy
±5%
±5%
±5%
±5%
±5%
±5%
Output current
1250mA
1300mA
1350mA
1400mA
1450mA
1500mA
Ripple voltage
＜1V
＜1V
＜1V
＜1V
＜1V
＜1V
temperature drift
±8%
Start time
100Vac＜1S 230Vac＜0.5S 277Vac＜0.5S
Output linear adjustment rate
±5%
input
Input linear adjustment rate
±5%
Voltage range
100 ~ 277VAC (limit voltage: 90 ~ 305vac) & nbsp;
frequency range
47～63Hz
power factor
≥0.9 
≥0.9 
≥0.9
≥0.9
≥0.9
≥0.9
efficiency
≥87%
≥87%
≥87%
≥87%
≥88%
≥88%
Surge current
<60A/ 350uS@230Vac
Input current
Max :0.85A
Harmonics (typical)
25%
 
protect
Open circuit protection
Open circuit voltage < 58vdc
Short circuit protection
Burping mode, which can be automatically restored after the abnormal condition is removed
 
 
environment
working temperature
-30～+50℃
Working humidity
20-90% RH (no condensation)
Storage temperature / humidity
-40 ℃ - 80 ℃; 10-90% RH (no condensation)
Atmospheric pressure
86-106KPa
Safety specification
EN61347-2-13:2006 /EN61347-1:2008
Withstand voltage
I/P-O/P:3.75KVac,<5mA,60S；
Insulation impedance
I/P-O/P:500Vac,>100M?0?9
electromagnetic interference
According to en55015 and en61000-3-2.
Surge level
Comply with iec61000-4-5 (L-N: 1KV)
Electromagnetic immunity
According to en61000-4-2,3,4,5,6,8,11; EN61547
other
size
(L*W*H) =124mm*79mm*30mm
IP level
IP20
weight
g
packing
carton
Warranty Statement
3 years (TC & le; 75 ℃)
Test instructions
1. Unless otherwise specified, the above power factor, harmonic and efficiency parameters are measured under the conditions of ambient temperature 25 ℃, humidity 50%, input voltage 230VAC and 90% load.
Supplementary notes
1. Customers are advised to install overvoltage and undervoltage protection and surge protection devices in the lamp power supply circuit to ensure power safety
2. PC cover, shell, plug and other accessories for power supply in Luminaire must meet ul94-v0 and above fire rating
3. As a part of the whole lamp, the power supply is used in combination with the terminal equipment. Because the EMC performance is affected by the LED lamp and wiring, the terminal equipment manufacturer needs to re confirm the EMC of the whole device.